A1030050 BOFA AD Base 3/Z/C180 filter

Description

The A1030050 BOFA filter is a replacement combined air filter for the BOFA AD Base 3/Z/C180 extractor. This filter is a main filter that uses a HEPA filter medium to remove fine particles from the air, in order to eliminate the harmful fumes, gases and vapours generated by laser processes such as laser cutting, marking and engraving.

The A1030050 BOFA AD filter is easy to install and replace. Simply slide it into the slot provided in the extractor. It is recommended to replace the filter every 3 to 6 months, depending on use. It is also important to make sure that you are using the right filter for the right extractor, in order to guarantee optimum extractor performance and maximum filter life.

The A1030050 BOFA filter uses a high-quality HEPA filter medium and activated carbon. These elements are designed to remove fine particles from the air. HEPA filters are known for their high filtration efficiency, capable of trapping up to 99.997% of particles of 0.3 microns or larger. Finally, its construction, with a galvanised steel casing sealed with a polyurethane sealant, ensures optimum filtration.