3D PrintPro3 – BOFA Fume Extractor
894,64 € excl. VAT
The 3D PrintPro3 BOFA fume extractor is equipment designed to extract the fumes and dust generated by 3D printers. The 3D PrintPro3 extraction system offers the advantages of a low noise level and minimal energy consumption.
3D PrintPro3 technology captures printing fumes and vapours at source, before they reach the operator’s breathing zone. Digital speed control allows the airflow, up to 120 m³/h, to be adjusted to the printer and the application.
The 3D PrintPro3 fume extractor filters the air in three stages: a pre-filter stops the largest particles, then a combined filter retains 99.995% of 0.3 µm particles (HEPA) and traps volatile organic compounds and odours in 3 litres of activated carbon. Manifolds (plenums) mounted on the printer capture the fumes during printing, and the filtered air is then returned to the room.
The 3D PrintPro3 BOFA fume extractor features a modular filtration system, which allows worn or damaged filters to be replaced quickly and easily without any special skills.
The BOFA 3D PrintPro3 extractor is a mid-range solution for enclosed or partially enclosed 3D printing.
Is this the right system for you?
Let our knowledgeable team help you choose the system best suited to your needs.
Features
Filter type: |
|
|---|
Filter media 1: |
|
|---|
Filter media 2: |
|
|---|
Air flow (m3/h): | 120 |
|---|
Suction pressure (mbar): | 20 |
|---|
Noise level (db): | < 57 |
|---|
Application types: |
|
|---|
Weight (Kg): | 11 |
|---|
The 3D PrintPro3 BOFA fume extractor is equipment designed to extract the fumes and dust generated by 3D printers. The 3D PrintPro3 extraction system offers the advantages of a low noise level and minimal energy consumption.
3D PrintPro3 technology captures printing fumes and vapours at source, before they reach the operator’s breathing zone. Digital speed control allows the airflow, up to 120 m³/h, to be adjusted to the printer and the application.
The 3D PrintPro3 fume extractor filters the air in three stages: a pre-filter stops the largest particles, then a combined filter retains 99.995% of 0.3 µm particles (HEPA) and traps volatile organic compounds and odours in 3 litres of activated carbon. Manifolds (plenums) mounted on the printer capture the fumes during printing, and the filtered air is then returned to the room.
The 3D PrintPro3 BOFA fume extractor features a modular filtration system, which allows worn or damaged filters to be replaced quickly and easily without any special skills.
The BOFA 3D PrintPro3 extractor is a mid-range solution for enclosed or partially enclosed 3D printing.
3D PrintPro3 – BOFA Fume Extractor
Key points

HEPA filter

Activated Carbon filter

Automatic voltage detection and adjustment

Optional Start / Stop signal
Our customer service
In-store collection
Our products can be collected directly from our warehouse in Villers-les-Pots (21)
Express delivery
Standard delivery
Secure payment
Bank card (Visa, Mastercard, CB)
Apple Pay and Google Pay
Administrative mandate
Business accounts on request
Official distributor
Premium experience

